Garg Scientific Glass Industries - Products

Introduction		Tee Equal Long
Pipe Sections		Tee Unequal
Reducers		Crosses Equal
90^o Bends		Pipe Closure
45^o Bends		Hose Connector
Tee Equal		90^o Reducing Bends

Introduction

Borosilicate glass pipeline components find universal application throughout the world’s chemical, pharmaceutical, food and drink and allied industries where the advantage of using glass as a basis for the construction of complete process systems have long been recognized:

With almost universal resistance to corrosion, a long service life is guaranteed and maintenance is kept to a minimum.

Their transparency permits visual monitoring of the process at all times.

Being inert, the risk of contamination is negligible.

Smooth surfaces allow easy cleaning and sterilization and prevent the build-up of solid on the inner walls.

The complete range of pipeline components is described on the following pages. Components with a standard flat buttress ends are available from DN 25 to DN450.

For standard flat buttress end connections from DN25 to DN300, it is possible to achieve a 3° deflection in the joint by using a flexible gasket. Details of these and all other couplings and gasket can be found in section Couplings.

The pipeline components described in this section of the catalogue comply, which means that 90° bends, tee pieces and equal crosses are interchangeable.

DN refers to the nominal bore. Unless otherwise stated all dimensions are given in mm.

For permissible operating conditions, please see section Technical Information.

Top

Pipe Sections

	DN (mm) 25	DN (mm) 40	DN (mm) 50
L (mm)	Cat Ref	Cat Ref	Cat Ref
75	GPS1/75	GPS1.5/75	-------
100	GPS1/100	GPS1.5/100	GPS2/100
125	GPS1/125	GPS1.5/125	GPS2/125
150	GPS1/150	GPS1.5/150	GPS2/150
175	GPS1/175	GPS1.5/175	GPS2/175
200	GPS1/200	GPS1.5/200	GPS2/200
300	GPS1/300	GPS1.5/300	GPS2/300
400	GPS1/400	GPS1.5/400	GPS2/400
500	GPS1/500	GPS1.5/500	GPS2/500
700	GPS1/700	GPS1.5/700	GPS2/700
1000	GPS1/1000	GPS1.5/1000	GPS2/1000
1200	GPS1/1200	GPS1.5/1200	GPS2/1200
1500	GPS1/1500	GPS1.5/1500	GPS2/1500

	DN (mm) 80	DN (mm)100	DN (mm)150
L (mm)	Cat Ref	Cat Ref	Cat Ref
125	GPS3/125	GPS4/125	GPS6/125
150	GPS3/150	GPS4/150	GPS6/150
175	GPS3/175	GPS4/175	GPS6/175
200	GPS3/200	GPS4/200	GPS6/200
300	GPS3/300	GPS4/300	GPS6/300
400	GPS3/400	GPS4/400	GPS6/400
500	GPS3/500	GPS4/500	GPS6/500
700	GPS3/700	GPS4/700	GPS6/700
1000	GPS3/1000	GPS4/1000	GPS6/1000
1200	GPS3/1200	GPS4/1200	GPS6/1200
1500	GPS3/1500	GPS4/1500	GPS6/1500

	DN (mm)225	DN (mm)300	DN (mm)450
L (mm)	Cat Ref	Cat Ref	Cat Ref
300	GPS9/300	GPS12/300	GPS18/300
500	GPS9/500	GPS12/500	GPS18/500
1000	GPS9/1000	GPS12/1000	GPS18/1000
	GPS9/1200	GPS12/1200	GPS18/1200
1500	GPS9/1500	GPS12/1500	GPS18/1500

Top

Reducers

DN (mm)	DN1 (mm)	L (mm)	Cat Ref
40	25	100	GPR 1.5/1
50	25	100	GPR 2/1
50	40	100	GPR 2/1.5
80	25	125	GPR 3/1
80	40	125	GPR 3/1.5
80	50	125	GPR 3/2
100	25	150	GPR 4/1
100	40	150	GPR 4/1.5
100	50	150	GPR 4/2
100	80	150	GPR 4/3
150	25	200	GPR 6/1
150	40	200	GPR 6/1.5
150	50	200	GPR 6/2
150	80	200	GPR 6/3
150	100	200	GPR 6/4
225	25	250	GPR 9/1
225	40	250	GPR 9/1.5
225	50	250	GPR 9/2
225	80	250	GPR 9/3
225	100	250	GPR 9/4
225	150	250	GPR 9/6
300	25	275	GPR 12/1
300	40	275	GPR 12/1.5
300	50	275	GPR 12/2
300	80	275	GPR 12/3
300	100	300	GPR 12/4
300	150	300	GPR 12/6
300	225	300	GPR 12/9
450	25	325	GPR 18/1
450	40	325	GPR 18/1.5
450	50	325	GPR 18/2
450	80	375	GPR 18/3
450	100	375	GPR 18/4
450	150	375	GPR 18/6
450	225	375	GPR 18/9
450	300	375	GPR 18/12

Top

90^o Bends

DN (mm)	L (mm)	Cat Ref
25	100	GPB 90/1
40	150	GPB 90/1.5
50	150	GPB 90/2
80	200	GPB 90/3
100	250	GPB 90/4
150	250	GPB 90/6
225	375	GPB 90/9
300	450	GPB 90/12
450	600	GPB 90/18

90° Bends with Thermometer Branch

DN (mm)	DN1 (mm)	L (mm)	L1 (mm)	Cat. Ref.
50	25	150	225	GPBT 2
80	25	200	280	GPBT 3
100	25	250	330	GPBT 4
150	25	250	340	GPBT 6
225	25	375	480	GPBT 9

These items allow a thermometer to be incorporated into an installation.

Top

90° Reducing Bends

DN (mm)	DN1 (mm)	L (mm)	L1 (mm)	Cat Ref
40	25	150	125	GPBR 1.5/1
50	40	150	150	GPBR 2/1.5
80	50	150	150	GPBR 3/2
100	50	200	150	GPBR 4/2
100	80	200	175	GPBR 4/3
150	50	200	150	GPBR 6/2
150	80	250	175	GPBR 6/3
225	80	250	175	GPBR 9/3
300	80	300	175	GPBR 12/3
300	150	450	250	GPBR 12/6
450	150	450	250	GPBR 18/6

Top

45^o Bends

DN (mm)	L (mm)	Cat Ref
25	75	GPB 45/1
40	100	GPB 45/1.5
50	100	GPB 45/2
80	125	GPB 45/3
100	175	GPB 45/4
150	200	GPB 45/6
225	225	GPB 45/9
300	275	GPB 45/12

Top

Tee, Equal

DN (mm)	L (mm)	Cat Ref
25	70	GPT 1
40	90	GPT 1.5
50	100	GPT 2
80	125	GPT 3
100	175	GPT 4
150	225	GPT 6
225	300	GPT 9
300	450	GPT 12

Top

Tee Equal Long

DN (mm)	L (mm)	Cat Ref
25	100	GPTL 1
40	150	GPTL 1.5
50	150	GPTL 2
80	200	GPTL 3

Tee Piece to Interchange with 90° Bend

Top

Tee Unequal

DN (mm)	DN1 (mm)	L (mm)	L1 (mm)	Cat Ref
40	25	200	75	GPTU 1.5/1
50	25	200	80	GPTU 2/1
50	40	200	100	GPTU 2/1.5
80	25	250	100	GPTU 3/1
80	40	250	100	GPTU 3/1.5
80	50	250	115	GPTU 3/2
100	25	250	110	GPTU 4/1
100	40	250	125	GPTU 4/1.5
100	50	250	125	GPTU 4/2
100	80	300	150	GPTU 4/3
150	25	250	150	GPTU 6/1
150	40	250	150	GPTU 6/1.5
150	50	250	150	GPTU 6/2
150	80	300	175	GPTU 6/3
150	100	300	200	GPTU 6/4
225	25	300	185	GPTU 9/1
225	40	300	185	GPTU 9/1.5
225	50	300	190	GPTU 9/2
225	80	300	210	GPTU 9/3
225	100	450	250	GPTU 9/4
225	150	450	275	GPTU 9/6
300	25	400	230	GPTU 12/1
300	40	400	230	GPTU 12/1.5
300	50	400	230	GPTU 12/2
300	80	400	250	GPTU 12/3
300	100	400	275	GPTU 12/4
300	150	450	300	GPTU 12/6
300	225	600	300	GPTU 12/9
450	25	400	320	GPTU 18/1
450	40	400	320	GPTU 18/1.5
450	50	400	320	GPTU 18/2
450	80	400	320	GPTU 18/3
450	100	400	320	GPTU 18/4
450	150	600	380	GPTU 18/6
450	225	800	400	GPTU 18/9
450	300	800	400	GPTU 18/12

Top

Crosses Equal

DN (mm)	L (mm)	Cat Ref
25	100	GPX 1
40	150	GPX 1.5
50	150	GPX 2
80	200	GPX 3
100	250	GPX 4
150	250	GPX 6

Top

Pipe Closure

DN (mm)	L (mm)	Cat Ref
25	75	GPBE 1
40	75	GPBE 1.5
50	100	GPBE 2
80	95	GPBE 3
100	140	GPBE 4
150	140	GPBE 6
225	155	GPBE 9
300	180	GPBE 12

Top

Hose Connector

DN (mm)	d (mm)	L (mm)	Cat Ref
25	20	90	GPHC1/.75
25	26	90	GPHC1/1
40	26	100	GPHC1.5/1
40	42	100	GPHC1.5/1.5

Top

Copyrights Reserved 2001-2007 by Garg Scientific Glass Industries.